 |
|
We are a leading manufacturer and supplier of a wide gamut of Plasticiser that are highly appreciated by our clients for their quality. Widely used in construction industry, these products are manufactured using quality raw material and hence are extremely reliable and durable. We offer this excellent product at market leading prices.�
|
 
 

| CAC - Chemplast
Water reducing Hyper plasticiser for concrete Features / Uses: - To increase / extend workability
- To reduce water content
- To increase compressive strength
- To effect cement economies
- Improves the cohesiveness in concrete mix helping to reduce bleeding & segregation.
- Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.
- Lower pumping pressure
Specification: ASTM C 494 – Type A IS 9103: 1999 Typical Application: - Low grades concrete
- Precast concrete
- In concrete brick & block manufacture
- In hot climates to extend workability
- Wherever reduced water content would be of benefit to reduce permeability.
Technical Information - Colour : Brown Liquid
- Specific Gravity @300C : 1.170 +0.02
- Chloride content : Nil
- pH : min. 6
- Shelf life : 1 year
Dosage / Coverage0.3 to 0.8 kg / 100 kg of cement (depending on site requirements) Packing: 250 kg drum / Bulk (9MT 
|
 
 
 

| CAC - Retardplast
Description: Retarding Plasticizers for concrete Features / Uses: - Enables controlled extension of initial set.
- Highly effective in high cement, low water content mixes where its use enables concrete to be more workable without loss in strength, density and durability.
- To reduce water content
- The retarding action allows continuous concrete pours to be made, thus reducing the number of construction joints needed.
- The strength gain of concrete containing CACRetardplast is enhanced.
Specification: ASTM C 494 - Type B & D IS 9103: 1999 Typical Application: - Ready Mix Concrete
- Precast concrete In hot climates to extend workability & control setting time of concrete
- White cement concrete
Technical Information - Colour : Pale Straw Liquid
- Specific Gravity @300C : 1.160 +0.02
- Chloride content : Nil
- pH : min. 6
- Shelf life : 1 year
Dosage / Coverage0.1 to 0.5 kg / 100 kg of cement (depending on site requirements) Packing: 235 kg drum 
|
 
 
 

| CAC - Retardplast 10
Description: Water reducing & retarding plasticizer for concrete Features / Uses: - Significantly increase or extend workability therefore easing placing.
- To reduce water content and increase compressive strength.
- To effect cement economies.
- Improves the cohesive property of concrete helping to reduce segregation and bleeding.
- Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.
- Lower pumping pressure
Specification: ASTM C 494 - Type B & D IS 9103: 1999 Typical Application: - Ready Mix Concrete for lower grades
- Precast concrete
- In hot climates to extend workability.
- Wherever reduced water content would be of benefit to reduce permeability.
Technical Information - Colour : Brown Liquid
- Specific Gravity @300C : 1.180 +0.02
- Chloride content : Nil
- pH : min. 6
- Shelf life : 1 year
Dosage / Coverage0.4 to 0.9 kg / 100 kg of cement (depending on site requirements) Packing: 245 kg drum / Bulk (9MT) 
|
 
 
 

| CAC - Retardplast 30
Water reducing & retarding plasticizers for concrete Features / Uses: - Significantly increase or extend workability therefore easing placing.
- To reduce water content and increase compressive strength.
- To effect cement economies.
- Improves the cohesive property of concrete helping to reduce segregation and bleeding.
- Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.
- Lower pumping pressure
- Moderate to extended retardation depends on the dosage.
- Helps to eliminate cold joints.
Specification: ASTM C 494 - Type B & D IS 9103: 1999 Typical Application - Ready Mix Concrete for lower grades
- Precast concrete
- In hot climates to extend workability.
- Wherever reduced water content would be of benefit to reduce permeability.
Technical Information - Colour : Brown Liquid
- Specific Gravity @300C : 1.200 +0.02
- Chloride content : Nil
- pH : min. 6
- Shelf life : 1 year
Dosage / Coverage0.4 to 0.8 kg / 100 kg of cement (depending on site requirements) Packing: 245 kg drum / Bulk (9MT 
|
 
 
 

| CAC - Setplast
Description :
Accelerating Plasticizers to reduces Setting time of concrete - Reduces setting time depending on the dosage and ambient temperature.
- Helps to achieve high early strength, hence reduction in de-shuttering time. Hence increases the construction work speed.
- Helps in reducing cement content for a required strength.
- Reduces construction cost- no delay due to cold weather, use of OPC instead of Rapid Hardening Cement.
Specification : ASTM C 494 - Type C IS 9103: 1999 Typical Application : • Low temperature concrete • Precast and Reinforced Concrete • Concrete block and mortar • Concrete Pipes, Brick laying mortar mixes Technical Information : Colour : Colourless Liquid Specific Gravity @300C : 1.260 +0.02 Chloride content : Nil Shelf life : 1 year Dosage / Coverage : 03 to 38 kg/m3, depending upon acceleration desired. Packing : 245 kg drum 
|
 
 
 

| CAC - LIW Plasticiser
Liquid Integral Waterproofing admixture for concrete and plaster Features / Uses: - Increases cohesiveness in concrete / plaster
- Increases durability, by increase in impermeability
- Does not affect the setting time and strength
- Ready to use liquid, hence dispersion is better
- Reduces shrinkage cracks in plaster & concrete
- Economical in application
Specification: ASTM C 494- Type A & D Typical ApplicationFor waterproofing of concrete & sand-cement mortar used in basements, roof slabs, screeds, water retaining structures, bathrooms & balconies, etc. Technical Information - Colour : Brown Liquid
- Specific Gravity @300C : 1.180 +0.02
- Chloride content : Nil
- pH : min. 6
- Shelf life : 1 year
Dosage / Coverage300 ml / 100 kg of cement Packing: 225 kg drum / 25 kg can 
|
 
|
Plasticiser CAC - Chemplast CAC - Retardplast CAC - Retardplast 10 CAC - Retardplast 30 CAC - Setplast CAC - LIW Plasticiser Super Plasticiser Hyper Plasticisers Concrete Additives
 |